SA

SEMI-AUTOMATIC SHEET-TO-SHEET LAMINATING/MOUNTING MACHINE

The Lamina SA is a sheet-to-sheet semi-automatic laminating/mounting machine. It has an automatic suction cup feeder for bottom sheets and a hand fed operation for top sheets. The machine is very operator-friendly, and because of the modular construction it allows upgrading to fully automatic with little or no disruption.

- Read More -

Machine highlights

LOW SPEED

Up to 1500 sheets/hour

EDGE TO EDGE

Consistant registration accuracy up to 0,2mm

LOW CAPACITY

Manual Top feeder - 800mm Bottom feeder

SEMI-AUTOMATIC FEEDER

Manual top and suction cup picker for bottom

Machine Video demo

Machine Sizes

SA 1110

SA 1116

SA 1416

SA 1420

SA 1620

Machine Options

PRESSURE BELT UNIT

Enhances the bonding and finish for a flat and smooth final product; recommended for the production of 2-ply/open-fluted corrugated material

- Read More -

STACKER UNIT

Fully AUTO system that down stacks final product flat and perfectly formatted on the pallet ready for the next production phase. Even short orders with quickly growing stacks are no problem for the Stacker. Reduces manpower and downtime

- Read More -

NON-STOP STACKER UNIT

Allows unloading of perfectly formatted palleted stacks without halting production for the unloading phase. The reloading of empty pallets in the unit is also achieved during this process. Reduces manpower and downtime

- Read More -

FLIP FLOP UNIT

Fully AUTO system that turns the product 180 degrees periodically during production, to deliver a perfectly flat-drying final product – eliminates end-product warping. Ideal for double-sided production. Reduces manpower and downtime

- Read More -

ANTI WRAP SYSTEM

Prevention of possible glue roller wrap-around of low gsm materials

- Read More -

SHEET DETECTION

State-of-the-art system that detects multiple sheets. Perfect for double-sided production runs

- Read More -

SINGLE-FACE FEEDER

Foam suction cup unit/system for ‘picking’ 2-ply/open fluted corrugated material(s)

- Read More -

PRELOADING RAILS

For quick and easy loading, and accurate positioning of palleted material(s) in our high capacity feeders eliminating loading down time

- Read More -

GLUE SYSTEM FOR IBC

Fully AUTO pump system to feed machine from IBC

- Read More -

PARTIELL GLUING

Application of glue to specific areas of the substrate and not the total surface area of the board

- Read More -

SA- REAR EDGE PICKER

Enhances the efficient picking of big formatted substrate(s)

- Read More -

Lamina 4.0

Fully integrated industry 4.0

- Read More -

Machine Info

SA

The Lamina SA is a sheet-to-sheet semi-automatic laminating/mounting machine. It has an automatic suction cup feeder for bottom sheets and a hand fed operation for top sheets. The machine is very operator-friendly, and because of the modular construction it allows upgrading to fully automatic with little or no disruption.

A varying amount of top and bottom sheets can be handled in the machine, and because of its compact size the machine is very easy to integrate in your working area.

A number of options such as Single Face Feeder, Down Stacker and Pressure Belt etc. Can be added whenever it is required.

Lamina semi-automatic laminating machine type 1110-1620 SA, 800/-

A Lamina Model semi-sheet laminator - For sheet-to-sheet laminating of paper and cardboard-to-cardboard, solid and corrugated.

The machine features a modular construction which combines a rigid framework with modern anodized alumininum profiles resulting in a heavy-duty, yet attractive unit that will give many years of dependable service. Set up and changeover are accomplished quickly and easily from the operator side without the use of tools. A combination of mechanical and photocell controls results in consistent registration accuracy up to +/- 0,2 mm when proper materials and conditions exist.

Lamina's laminating machine type 1110-1620 SA is equipped with:

- Automatic substrate sheet feeder

- Precision gluing unit with automatic glue application

- Laminating station with automatic front and side registration system

- Pressure station

- Stacking table

- PLC control system

Automatic substrate sheet feeder

For automatic feeding of the bottom sheet. Suction cups pick up the top sheet from the stack and transfer it to the precision gluing unit. The feeder is designed to handle materials from 250 gm/m2 to 10 mm (0,39) 1 pts = 28,25 g/m2 corrugated from  0,6-10 mm (0,016 - 0,39).

Manualtop sheet feeder
The feeder is designed to handle materials 800 mm (32)

Precision gluing unit‍
The gluing units for accurate application of cold PVA glue to the upper surfaceof the substrates are equipped with automatic glue dispensers directlyconnected to the glue container. The film thickness of the glue isautomatically kept under control irrespective of the sheet (board) thickness.During machine standstill the rotation speed of the rollers is reduced to a lowidling speed. The precision gluing unit can be made fully accessible for easycleaning by vertically swinging the top and bottom sheet conveyors up and outof the way.

Laminating station‍
In the automatic laminating station, the top and bottom sheets areautomatically controlled by the registration system. the sheets are registeredautomatically at the lead as well as at the operator side, resulting inaccuracy levels up to +/- 0,2 mm. Photocells prevent the lamination processunless both sheets are properly positioned.

PLC control system
The Lamina PLCcontrol system includes:
Touch screen monitor, continuous display of operating status, display of set upprocedures for machine functions, touch screen activation of controlled machinefunctions and complete diagnostic screen with visual alarm.

Press station
This unitconsists of an adjustable press roller system ensuring perfect lamination.

Stacking table
For thestacking of finished products. The table can be turned and pulled out acc torequirements.

Installs